Products Deatails
Block Jointing Motor
UltraaPride AAC Block Jointing Mortar is a high quality factory blend product with high grade selected raw materials and polymers. When compared to site-mixed sand and cement mixture, it gives stronger adhesion and smoother finish.
Applications
Designed for internal floor & wall applications
Advantages
- No Curing required
- Negligible Wastage
- High strength with 3 mm thickness
- Time Saving
- Maintain Consistence Quality Technologically
Technical Information :
Colour : Grey
Pot Life : 90 Min (after mixed)
Shelf life: 6 months
Ratio of Mixing : 3:1 (powder to water)
Packaging :Available in 40 Kgs bags.
Coverage : For 40 Kgs bag, recommending 3 mm thickness for a coverage of wall area as AAC block length 600 mm and width 200mm remains same
Curing:Self curing material and water curing is not required
Preparation of Surface
- Wet AAC Blocks before construction to avoid the absorption of moisture from the mortar.
- Confirm that dusting is done on the layers to wipe out the dust on the surface of the block before applying mortar.
Precaution :
- As Ultraapride AAC Jointing mortar contains sand and Cement, which may produce allergic effect . Keep out of reach of Children.
- It is recommended to avoid direct eye and skin contact.
MIXING :
- 25-30% (by weight of material), water should be needed to mix the powder
- After mixing with water, the mortar should be used within 90 minutes.
Coverage :
For 40 Kgs bag, recommending 3 mm thickness for a coverage of wall area as AAC block length 600 mm and width 200mm remains same.
- 600x200x100mm (4”) thick wall covers : 130 Sq.Ft
- 600x200x150mm (6”) thick wall covers : 85 Sq.Ft
- 600x200x200mm (8”) thick wall covers : 65 Sq.Ft
- 600x200x230mm (9”) thick wall covers : 55 Sq.Ft
FAQ
It is a block jointing mortar for the internal and external wall of AAC blocks, CLC blocks, hollow concrete blocks, and bricks.
Thin jointing (2-3mm), Quantity required is 75% less than the conventional mortar, Time-saving, Easy application, No curing required, Eco-friendly, less manpower
Thinner jointing with high adhesion gives better quality, Factory-made product with consistent quality, No water curing is required at the site, Ready to use, Better bond than conventional cement-based mortar
One can get 160-180 sq.ft. on coverage per 50 kg bag when used with 3-4 thickness for 100 blocks of 4”.
One should mix approximately 15 ltr of water for 50 kg bag.
Our Clients
Our awesome clients we’ve had the pleasure to work with!
