Block Jointing Motors details -

Products Deatails

Home/ Products/ Details

Block Jointing Motor

UltraaPride AAC Block Jointing Mortar is a high quality factory blend product with high grade selected raw materials and polymers. When compared to site-mixed sand and cement mixture, it gives stronger adhesion and smoother finish.

Applications

Designed for internal floor & wall applications

Advantages

No Curing required
Negligible Wastage
High strength with 3 mm thickness
Time Saving
Maintain Consistence Quality Technologically

Technical Information :

Colour : Grey

Pot Life : 90 Min (after mixed)

Shelf life: 6 months

Ratio of Mixing : 3:1 (powder to water)

Packaging :Available in 40 Kgs bags.

Coverage : For 40 Kgs bag, recommending 3 mm thickness for a coverage of wall area as AAC block length 600 mm and width 200mm remains same

Curing:Self curing material and water curing is not required

Preparation of Surface

Wet AAC Blocks before construction to avoid the absorption of moisture from the mortar.
Confirm that dusting is done on the layers to wipe out the dust on the surface of the block before applying mortar.

Precaution :

As Ultraapride AAC Jointing mortar contains sand and Cement, which may produce allergic effect . Keep out of reach of Children.
It is recommended to avoid direct eye and skin contact.

MIXING :

25-30% (by weight of material), water should be needed to mix the powder
After mixing with water, the mortar should be used within 90 minutes.

Coverage :

For 40 Kgs bag, recommending 3 mm thickness for a coverage of wall area as AAC block length 600 mm and width 200mm remains same.

600x200x100mm (4”) thick wall covers : 130 Sq.Ft
600x200x150mm (6”) thick wall covers : 85 Sq.Ft
600x200x200mm (8”) thick wall covers : 65 Sq.Ft
600x200x230mm (9”) thick wall covers : 55 Sq.Ft

FAQ

For what kind of blocks this block jointing adhesive is used?

It is a block jointing mortar for the internal and external wall of AAC blocks, CLC blocks, hollow concrete blocks, and bricks.

Why should we use only blocking jointing mortar over cement and sand?

Thin jointing (2-3mm), Quantity required is 75% less than the conventional mortar, Time-saving, Easy application, No curing required, Eco-friendly, less manpower

Few Advantages’ of block mortar

Thinner jointing with high adhesion gives better quality, Factory-made product with consistent quality, No water curing is required at the site, Ready to use, Better bond than conventional cement-based mortar

What is the coverage of the AAC block jointing mortar?

One can get 160-180 sq.ft. on coverage per 50 kg bag when used with 3-4 thickness for 100 blocks of 4”.

How much water is used to make the mixture

One should mix approximately 15 ltr of water for 50 kg bag.